You know how I love a good deal. Well, I have used the same technique to upcycle both picture frames and dollar store slates. Basically, you are taking a somewhat inferior product and kicking it up a notch.
For this particular project, I used a dollar store slate, paint, homemade chalkboard paint, Modge Podge and some scrapbooking paper.
- First, tape off the slate portion. Give it a very gentle sanding and then add a fresh coat of homemade chalkboard paint. (I often find that the dollar store ones are not very user-friendly and the surface does work well with chalk, so I give it a coat of my own paint.)
- Once the chalkboard paint is dry, remove the tape and paint out the back and edges of the slate with a colour of your choice. (If this is being mounted on a wall, you can omit this step and leave the plain wood.)
- Cut a piece of coordinating scrapbook paper, that is slightly bigger than the size of the frame.
- Add a very thin coat of Modge Podge to the frame. You want the coat to be thin, but be sure to cover all of the frame so that the paper sticks well.
- Lay the scrapbooking paper over the frame and firmly press the paper to get out all of the air bubbles.
- Once completely dry, carefully cut away the excess paper from both the inside and outside of the frame by running a utility knife along the edge of the frame.
- I like to sand the edges where the paper and wood frame meet. This tends to expose the “white” surface of the paper below the print on it. I like the distressed look of the exposed white.
- You can add a coat of Modge Podge over top for protection, if desired.
- You must prepare the chalkboard surface by completely covering it with chalk and then erasing it. (I usually hold my chalk on the side to prime the surface.)
Have you ever considered working from home? A revolutionary blogging system has hit the market. If you are interested in learning how to blog and earn money from home, you need to click this link.