Teen Room Project #6: Cityscape Mural

This mural was relatively simple, I didn’t do any pencil drawings at all, but rather went along the wall placing blue painter’s tape at random heights to get a varied height for the buildings I would later create. I basically just “guesstimated” the width of the finished buildings. We then stood back and adjusted the pieces of tape to make sure it didn’t look like “stairs” or too planned. Once we were happy with the random look of the building heights, we used a level to ensure that all of our vertical and horizontal lines were perfectly straight. I used the edge of the level as a guide to place my tape strips. Once the general shape of the buildings was complete (plain rectangles), I went back and began to add a bit more variability with roof styles, inconsistent widths and the odd white window. Eden really wanted to keep the look mostly “silhouette like”, so the addition of the windows was sparse. This suited me fine because I really wasn’t sure how the tape would peel up from under the 3 coats of paint. In the end, it peeled off really easily and I was left feeling like a few more windows would have been easy to do and perhaps have added to the finished look of the cityscape.

This slideshow requires JavaScript.

6 Steps to Bleed Resistant Taping:

The key to any taping is always the dry brush sealing of the edge. Never skip this step or you will get bleeding and it is the fasted way to take the “Wow!” out of your project. Always remember:

    1. Tape
    2. Seal with a relatively dry brush using the SAME colour of paint as your background. For example, I was painting a black cityscape against a white wall, so I used the exact same white as that used on the wall and sealed the edge of the tape so that no black paint could bleed through onto my white wall.
    3. Let the paint dry completely and look it over to ensure you’ve seal the entire edge along your tape.
    4. Paint with the desired colour.
    5. Let dry completely.
    6. Carefully remove the tape.